Trash Can Enclosure Fences | Pool Equipment Enclosure Fences


Specialty Fence Enclosures

Easy Solutions to Everyday Problems

 

 

Trash Can Enclosure Fence

trash-can-enclosure-fences-wood-enclosure-fence

Trash can enclosures are a convenient, visually appealing way to store your trash cans out of sight. They make taking out the trash less of a chore with an easy-open sliding gate, rather than having to hold open a spring loaded gate as you drag the trashcan out of the backyard. Trash can enclosures can be added to the side, rear or front of your house and still be HOA approved.

Features:

  • Custom built to match your fence
  • HOA approved to store your trash cans
  • Easy-open sliding gate
  • V-track
  • Cedar or pressure treated deck keeps trash cans off the ground
  • Lockable
  • Size adjustable
  • Covered by our standard Lifetime Warranty!

Starting at $1599!

 

Pool Equipment Enclosure Fence

Fence Companies Denton | Denton Fence Company

Our pool equipment enclosure fences are shingled, double lined, and water-tight. Having your pool equipment stored inside our pool equipment enclosure will protect and add to the longevity of your pool equipment, while also keeping it out of sight so it doesn’t detract from the beauty of your pool and landscaping. Unlike pre-fabricated sheds that you can buy, our pool equipment enclosure fences can be easily repaired, just like a typical fence by replacing a broken board.  Our covered enclosure fences have many other uses besides storing pool equipment such as lawn and garden equipment, pool accessories, and even can be used as a meat smoking closet.

Features:

  • Custom Built on-site
  • Easily Repaired
  • Sturdy
  • Single or Double Gate
  • Hides and protects equipment
  • Lockable
  • Covered by our standard Lifetime Warranty!

Starting at $2499!

 

Call now or use the form provided to request a quote on our specialty enclosure fences!

(214)952-3966

 

 

 

 


 



Source link

How to Install Gate Latch? –


This gate latch hardware is one of the easiest-to-install out there. But it may not be as easy as most people think.

Install Gate Latch

For those who are having a hard time with the gate latch installation, this article may be a fantastic way to install gate latch more efficiently and without any issue.

Many people struggle with this process when it comes to installing a garden gate – that’s why this perfect guide on how to install gate latch may help to do it faster & more effectively.

Even, some people like to know different types of gate latches and types of automatic gate opener, but not interested to know about a gate latch installation. So here, we will try to describe the process in easy way. Hope you love it.

Tools & Materials Needed to Install Gate Latch

Here you have the list of tools and materials listed as well as their priority defined in brackets. Have a quick look and make sure to keep them under your belt.

Tools:

  • Drill (Critical)
  • Jigsaw (Critical)
  • Ruler (Essential)
  • Safety Glasses (For Safety)
  • Gloves (For Safety)
  • Dust Mask (For Safety)
  • Ear Muffs (Optional)

Materials:

  • Gate Latch (Critical)
  • Latch Bar (Critical)
  • Self-Tapping Screws (Critical)
  • Sand Paper (Essential)
  • Marker (Essential)
  • Pencil (Optional)

Step-By-Step Installation Process

Cool. Soon as you have got all the necessary tools and materials, it is time to get on the real work. We will go step by step, okay?

1. Measure the Latch and the Bar

The latch is composed of two parts, the one that goes on the gatepost that adds as an anchor point, and the bar that goes inside the latch to secure the system.

To install this system correctly, it is critical to measure with the bar & latch where it is going to be placed.

Do this by positioning the bar on the gate frame and measuring where the latch will be. It should enter the latch precisely, so it doesn’t hit with the borders or comes uncomfortably inside.

Mark with the marker or pencil the points to screw. Make sure they match entirely with both the latch and the bar screw holes.

2. Drill the Screw Holes

After having everything marked and measured, it is time to start opening the holes with the drill.

Try to balance the drill even if it moves too much to avoid opening awkward holes that won’t fit the screws firmly inside.

If it is a metallic gate and gatepost, try to be even more careful when drilling. Avoid touching the drilling points with bare hands to escape burns.

3. Install the Bar

Now that all the holes are ready, it is time to start installing it. Start with the bar, making sure the holes fit entirely with the holes on the gate. Put the bar in position and start putting the screws in.

The self-tapping screws are better for metal gates than wooden ones. However, they work pretty well with both. Nails are also a good option for wooden gates, but not as reliable or easy to install.

4. Install the Latch

If the bar is installed, then it means now it is time to fix the latch. Here, fit the latch exactly where the bar reaches. Make sure to have all the necessary screw holes opened and ready to adjust the screws in.

Before screwing, the latch should fit entirely with the bar. Otherwise, fix until it does. After it does, start screwing in.

Make sure it fits sturdily and does not move by closing the gate and shaking it hard for a few seconds.

5. Mark an Access Hole or Finger Entrance

Some people like large access holes to fit their whole hands in, while there are others who prefer smaller holes for the fingers only. Whatever the preference, it is critical to mark it out first to have an idea about where it will go.

Use the ruler to measure and open the access hole. A circular shape for the hole can also be useful. After having the preferred form, mark it with a pencil or marker.

6. Open the Access with the Jigsaw

When the gate is installed, using the saw to open the access hole can be a nightmare. So here it is better to use the jigsaw to avoid problems.

Cut the complete access completely, and then make sure that hands or finger cross to the bar and latch entirely.

The access should be comfortable enough to avoid getting stuck, as it should never make the person make an awkward move to prevent injuries.

7. Finish

After having the access and everything else installed and figured out, it is time to start finishing the gate latch installation.

Smooth down the edges with the sandpaper, get all the fuzzy dust off the gate, and start using the gate as desired.

Conclusion

The process of how to fix a gate latch into any gate is a total piece of cake. It is all about knowing the right method to avoid making mistakes.

Believe it or not, to install gate latch like a pro, this guide is all you need to know.



Source link

How to Use an Egg Slicer? With Uses and Updated Information


A step-by-step guide about how to use an egg slicer. It also includes valuable information about best egg slicers and their different uses.

Without a doubt, slicing an egg with a knife is a piece of cake. But, the work gets stressing when you need to slice a mountain of eggs in a short time. In that case, you need a tool to help you be more efficient. Something like a professional egg slicer.

Slicing an egg with an egg slicer will only take a few seconds. In addition, there’s no risk of cutting your hand like there would happen if you use a knife. Best of all, these kitchen gadgets are very cheap and you can find them for less than $10.

In this step-by-step guide, you’ll learn how to use egg slicer like a pro. In addition, you’ll find valuable information about the operation and different uses of these gadgets.

What is Egg Slicer?

This is a kitchen tool used to evenly slice a hard-boiled egg. An egg slicer works the same way as a hinge. One of the hinge faces has an opening with steel wires spaced the same distance. When these wires pass through the egg, you get perfect slices of the same thickness.

Interestingly, the tool was invented by Willy Abel. This German inventor also created the bread cutter. The first egg slicers in history began to be sold in Berlin. Then, they became popular in Europe and the rest of the world.

Egg slicers can also be used to cut fruits and sausages. These gadgets are commonly used to decorate appetizer plates for different celebrations. Chefs also use them to reduce preparation time for some complex dishes.

Different Uses You Can Give To An Egg Slicer

Without a doubt, these tools are quite versatile. With them, you can prepare a wide variety of dishes in a few minutes. If you already have one, here’s a list with seven different uses you can give your device:

Slice A Butter Bar

With an egg slicer, you can get the same size portions from a single butter bar. This idea may be very useful for those working on a restaurant.

Cut Olives & Mushrooms To Make A Pizza

Some people don’t have the precision of a chef to fillet olives and mushrooms using a knife. This tool can help you with that.

Prepare Salads In A Few Minutes

If you don’t like big chunks of fruit in your salad, you can first cut the fruit in bars. Then use the slicer to get uniform fruit cubes in seconds.

Decorate Your Drinks

You can use your slicer to cut small portions of apples, pears and cherries to decorate your favorite cocktails.

Step by Step Egg Slicer Uses

Certainly, using an egg slicer is the easiest thing to do. But before getting started, make sure the egg has the right consistency. If the yolk is still runny, you’ll make a real disaster. Here’s a step-by-step procedure on how to slice an egg to perfection.

  • First of all, place the egg slicer on a flat surface. Then, open the lid with the cutting wires.
  • After that, place the egg in the egg-shaped seat on the base of the slicer.
  • Finally, close the lid of the slicer so the cutting wires pass through the egg. Then, remove the egg slices and add them to your preparations.

Conclusion

Without a doubt, there are a lot of different uses you can give to your egg slicer. You can slice fruits to decorate desserts or prepare salads. You can reduce a butter bar to small pieces. In conclusion, your imagination is the limit.

If you’re looking for something durable and sturdy, stay away from plastic slicers. Those made of stainless steel are the best of all. They’re perfect for heavy duties and can resist high impacts. In addition, you can replace the steel wires if they accidentally break.

Sources:

1.

2. https://en.wikipedia.org/wiki/Egg_slicer



Source link