If you’re going to install a chain link fence, anchoring each post in concrete is the best way to ensure your fence will stand straight and tall for years to come. It can be tempting to skip the time and expense of setting the posts in cement, but in the long run, the savings usually aren’t worth it.
Know Your Soil Composition
The type of soil you’ll be setting fence posts in will help determine
how stable the ground is, and how much you can expect the posts to move
over time. The eastern part of Wichita has clay soil, which can be very
difficult to dig in. Clay soil also expands and contracts quite a bit
with moisture fluctuations, so concrete anchors are a must. The west
side of Wichita has more sand in the soil, but using cement on each
fence post is still recommended.
Installing a Chain Link Fence with Concrete
Whether you use concrete or not, installing a chain link fence
yourself requires several tools and materials, including fence posts,
gates, chain link mesh, fasteners, tension bars and wires, post-hole
digger, power auger, hacksaw or pipe cutter, shovel, line level, mason’s
line, plumb bob, rubber mallet, socket wrenches, pull bar, fence
puller, pliers, pre-mixed concrete, gravel, and a trowel.
This method usually takes two full days to complete, which includes time for the cement to dry overnight.
Installing Chain Link Fence without Concrete
If you decide to install your chain link fence without concrete, use a
post-hole digger to make a hole deep enough to bury the posts at least
two feet, or about 1/3rd of the height. Never pound the posts into the
ground, especially if you have hard clay or rocky soil, because you’ll
bend the tops. The hole should be slightly bigger than the posts, so you
can back fill it with dirt packed tightly around the post.
Installing your fence without concrete will save you a small amount
of money on the concrete, trowel and gravel. You might be able to
complete the installation in a day if you use the auger to dig your post
holes. If you opt to save the auger rental fee (usually around $50 or
so), it will take longer because you’ll be digging the post holes by
Anchoring Fence Posts with Cement is Most Secure
If you just need a temporary fence, concrete anchors aren’t really
feasible. In all other cases, anchoring each post is the best way to
prevent shifting and leaning for years. Some people suggest just using
cement on the end, gate and corner posts, but this method can still
allow a lot of movement, so you’ll end up resetting the unanchored posts
in a few years anyway.
Many homeowners choose to install their own chain link fence,
but if you decide the job is too big or you just don’t want the hassle,
the professionals at Reddi Fence can get the job done quickly and
efficiently. Schedule your free estimate at 316-858-0757.
found on our website are provided as general guidelines, and Reddi
Industries does not assume any liability resulting from the provided